Champion Power Equipment 13004 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 19
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
7 REV 13004-20120905
ENGLISH 13004
ASSEMBLY
Battery cables should not be drawn taut.
Leave some slack for cable movement.
CAUTION
Never route electrical cables across any sharp
edges, through or near moving parts, or near
parts that become hot.
CAUTION
Winch Wiring
With some applications the motor leads may need
to be rotated to avoid interference with other
components.
Leads default position. Leads rotated 90º
Winch Wiring Contd.
1. Mount the winch to your vehicle.
2. FOR WINCH TO FULLY FUNCTION CONNECT
ALL LEADS CORRECTLY.
3. Connect the battery leads: Connect the red
(+) lead to the positive (+) terminal of the
vehicle’s 12 volt battery. Connect the black
() lead to the negative (–) terminal of the
vehicle’s 12 volt battery. (see wiring diagram)
4. Connect the winch leads: Connect red (+)
lead of the winch connection cables to the
positive (+) terminal of the winch motor.
Connect the black () lead of the winch
connection cables to the negative () terminal
of the winch motor. (see wiring diagram)
5. Check for proper drum rotation. Pull and
turn the clutch knob to the “out” position
(Free spooling). Pull out some cable from the
drum, and then turn the clutch knob to the
“In” position to engage the gears. Press the
cable out button on the handlebar switch. If
the drum is turning and releasing more cable
then your connections are accurate. If the
drum is turning and collecting more cable
then reverse the leads on the motor. Repeat
and check rotation.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Comments to this Manuals

No comments