Champion-power-equipment 73540i User Manual download pdf (Page 10)

7 REV 73540i-20130309

ENGLISH 73540i

Your generator requires some assembly. This unit ships

from our factory without oil. It must be properly serviced

with fuel and oil before operation.

If you have any questions regarding the assembly of your

generator, call our help line at 1-877-338-0999. Please

have your serial number and model number available.

Remove the Generator from the Shipping Carton

1. Set the shipping carton on a solid, ﬂat surface.

2. Remove everything from the carton except the

generator.

3. Using the handle of the unit, carefully remove the

generator from the box.

ASSEMBLY

1. Place the generator on a ﬂat, level surface.

2. Loosen the cover screws and remove the

maintenance cover.

4. Add 0.4 L (0.42 qt.) of oil and replace oil ﬁll cap/

dipstick. DO NOT OVERFILL.

5. Check engine oil level daily and add as needed.

3. Remove oil ﬁll cap/dipstick to add oil.

The recommended oil type is 10W-30 automotive

oil.

NOTE

Add Engine Oil

DO NOT attempt to crank or start the engine before

it has been properly ﬁlled with the recommended

type and amount of oil. Damage to the generator as

a result of failure to follow these instructions will

void your warranty.

CAUTION

Add Engine Oil Cont’d.

The engine is equipped with a low oil shut-off and

will stop when the oil level in the crankcase falls

below the threshold level.

CAUTION

Check oil often during the break-in period. Refer to

the Maintenance section for recommended service

intervals.

NOTE

The generator rotor has a sealed, pre-lubricated ball

bearing that requires no additional lubrication for

the life of the bearing.

NOTE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Comments to this Manuals

No comments

Champion-power-equipment 73540i User Manual Page 10

Comments to this Manuals

Related products and manuals for Power suppliers Champion-power-equipment 73540i